Coating amount calculator

Please calculate here the coating amount that you need for your printing job. This calculation is a orientation. Depending on different influencing factors, the result may vary. 

Please note that the result refers to the coating amount that is transfered to the printing sheet. The gross coating amount increases by the coating amount required for circulation.

Format of substrate: width cm height cm  
Amount of sheets         sheets
Coating transfer wet (s. below): g/m²
Area coverage: %
Coating amount: kg

 


 

Calculation of coating transfer wet


For the coating transfer in wet condition, please use the following calculation. The coating transfer depends on various influencing factors, as for example lines and condition of the anilox roller. Please note that this calculation is not valid for the application of pearlescent or metallic coatings and opaque white.

Engraving of anilox roller:            
Cell volume: cm³/m²
Coating transfer: g/m²