You have already subscribed to our newsletter.
You successfully unsubscribed from our newsletterContinue Shopping
HEAT SEAL LAQUERS
The finished packaging must also protect the contents against oxygen, light, and bacteria. The market faces major challenges when it comes to ruling out any adverse health (migration of chemical substances into the contents) and environmental effects of packaging coatings. Factors such as direct contact with food and compliance with food regulations are the primary considerations in developing safe product solutions.
As convenience is also a major consideration on the packaging market, food packaging has to be user-friendly and easy to handle. Cheese packaging that’s a struggle to open or yogurt pot lids that rip as they’re peeled off go against the current convenience mindset.
ACTEGA Rhenania has decades of experience in developing and manufacturing coatings for food packaging, and supplies heat seal lacquers (HSLs) for many applications. Whether for sealing blisters, lids, portion packaging (including pet food), or other wrappings, ACTEGA offers safe and user-friendly options.
ACTEGA heat seal lacquers are available worldwide, are suitable for use with all the usual sealing counterparts, and comply with the statutory food regulations in each country. They are processed using coil or sheet coating techniques.
The ACTEGA field sales force is highly trained and provides global technical support, including on-site support, for developing customized product solutions for both converters and end customers.
State-of-the-art, high-speed filling machines present new challenges for HSLs.
The operating speeds of state-of-the-art filling plants have increased considerably in the space of just a few years. The new heat seal lacquers have to withstand this increased throughput rate by providing the same performance at a lower sealing temperature and in less time. Today’s faster machines also call for an optimal coefficient of friction (COF). ACTEGA heat seal lacquers can be relied on to meet these requirements.
Frequently asked questions:
Can ACTEGA heat seal lacquers also be used in printing presses?
Yes – ACTEGA supplies products that are specially designed for use in printing presses.
What are spacer coatings needed for?
Not being able to process lids smoothly in a machine is a problem that costs manufacturers a lot of time and money. If lids get stuck together, they won’t always come apart again during the filling process. Spacer coating, which is applied to the inside surface of the lid (e.g. in the form of small dots, as shown in the picture below), improves the infeed rate and flow of lids into the plant.
The advantage to printing a spacer heat seal lacquer onto the inside surface of the lids – as opposed to embossing – is that it leaves no visible trace on the outer surface of the lid (an embossed pattern would show through), so it doesn’t interfere with the printed design.
Spacer coatings on the inside make lids easier to process in the filling plant.
- Substrate: 90 µm non-chromated foil
- Average coat weight: 9g / m²
- Upper jaw: 130 °C covered with Teflon
- Lower Jaw: 130 °C covered with Teflon
- Sealing time: 1 second 600N forc
ACTEGA Rhenania develops and manufactures coatings and adhesives for food, pet food, and pharmaceuticals packaging. ACTEGA Rhenania specializes in products intended for direct contact with food and in pigmented product solutions in an almost unlimited range of colors.
ACTEseal® covers a wide range of heat seal lacquers – whether aqueous or solvent-based, transparent or colored. ACTEGA provides customized product solutions to suit the packaging contents and plants in question.
Approvals for use with food
ACTEGA’s products comply with the following food regulations:
- FDA 175.105
- FDA 175.300
- EU 10/2011/EC
- Swiss Ordinance SR.817.023.21
- China GB 9685-2016
ACTEGA heat seal lacquers fulfill the following specific requirements
- PVC-free / containing PVC
- High solids content
- Bullet points
- Good hot-tack properties
- For food, pet food, and pharmaceutical packaging
- Approved for use with food
- Approved for use with pharmaceuticals
- Low-temperature seal (LTS)
- Suitable for use in microwaves and ovens
- Highly tear-resistant
- Highly puncture-resistant
Do any regional restrictions apply to purchasing ACTEGA heat seal lacquers?
Which are the advantages of ACTEGA’s new Heat Seal System for Peel-Off Ends?
- Extremely good seal strength starting at low sealing temperatures 120°C
- Visible footprint
- Easy to handle
- Excellent performance / price ratio