ACTEBOND® BPA-NI & EPOXYSILANE-FREE ADHESIVES

For Tamper-evident, peelable membranes and Cold Form Blisters

Laminates for tamper-evident, peelable membranes and cold form blisters offer an almost complete barrier against water, light and oxygen through the use of aluminum and enable an extended expiry date of the product as well as increased tamper evidence, which is particularly important for the packaging of pharmaceutical products.

With our product solution consisting of laminating adhesive and matching hardener, both duplex-laminates for peel-able membranes and triplex-laminates for cold form blisters can be produced.

TAMPER-EVIDENT, PEELABLE MEMBRANES

Duplex laminate:
Alu 48µm/ HDPE 50µm

Application:

  • Food
  • (dairy) Beverages
  • Non Food (e.g. motor oil)

COLD FORM BLISTERS

Triplex-laminate:
oPA 25µm/Alu 45µm/PVC 60µm
No primer necessary

Application:
  • Pharma
  • Non Food (e.g. battery packaging)

PRODUCT ADVANTAGES

  • Can also be used for high cycle rates with short sealing times due to high sealing resistance
  • Use of one product solution (adhesive and hardener) enables the production of two different applications
  • No primer necessary
  • Approved for food applications (details on food safety (worldwide) can be provided on request)
  • Satisfies the highest demands of the pharmaceutical industry (suitable for any climate zone, also for tropical temperatures in combination with high humidity - Tropical Blister)
  • Excellent substrate adhesion and flexibility
  • Exceptional thermal and chemical resistance
  • High Performance
  • No delamination even at high sealing temperatures
  • Annealing at elevated temperatures accelerates curing

OUR ADHESIVES ARE ALSO AVAILABLE IN A WIDE VARIETY OF COLORS

The pigmented adhesives from ACTEGA combine a decorative appearance with functional performance, while our color expertise offers additional, unique features for our ACTEbond® laminating adhesives range.

The colored versions enable you to replace full-area color printing. This saves on processing time and costs while also making it possible to create custom packaging designs by printing additional colors. Our pigmented adhesives are also impressive thanks to their excellent covering properties and their suitability for direct contact with foods (in line with FDA and EU directives).

„The possibility of using our ACTEbond® ASB-203 in a wide variety of colors makes this product an individual high-performance adhesive for the highest demands.”

Holger Schmitz

Technical Service and Sales Flexible Packaging

ACTEBOND® ASB-203 IN COMBINATION WITH HARDENER HT-038-S-LV

  • Solvent-based
  • For laminates with aluminum foils
  • Aliphatic hardener (base HDI)
  • ACTEbond ASB-203 + HT-038-S-LV can be applied with screen or smooth rollers
  • Lower laminating temperature (such as 30°C) possible

TECHNICAL DATA

 
ASB-203 (Adhesive) HT-038-S-LV (Hardener)
Viscosity 3500 ± 1500 mPas 35 ± 5 s
Solids 49 ± 2% 83 ± 2%
Density 1,050 ± 0,050 g/ml 1,105 ± 0,050 g/ml
Solvent Ethyl acetate Ethyl acetate
Mixing ratio 100 6
 

Formulation: Solvent-based 2-component polyurethane adhesive based on polyols in combination with aliphatic isocyanates.

ACTEGA - YOUR COMPETENT PARTNER

  • Individual technical service (also on site at the plant)
  • Many years of expertise and experience in the field of adhesives for packaging
  • Product solution already widely used and established by customers

FOOD SAFETY THANKS TO ADHESIVES THAT ARE FREE OF EPOXYSILANES AND BPA

Reliably safeguarding consumer health is our top priority. When it comes to applications that involve (direct) contact with foods, we painstakingly investigate the safety of the relevant raw materials and use only materials that verifiably comply with food regulations (such as FDA and EU directives).

As part of a safety-conscious approach, ACTEGA has developed adhesives that are free from BPA and epoxysilanes (such as GLYMO and GLYEO) but also exhibit outstanding performance.
 
MORE INFORMATION

That no question remains unanswered.

Contact
Download our brochure about our laminating adhesives for peelable membranes and Cold Form Blisters and find out more about the use of ACTEbond® adhesives.

DOWNLOAD

Close