Aquaprint 150-035

Markets

• 标签

Application method recommendation

• 湿碰湿
• Sheet-fed offset, coating unit (chambered doctor blade or roller system)
• 干-湿
• Attention: coating tends to separating. - The coating must be stirred intensively before use.
• 建议涂布 5 - 10 克/平方米/湿膜
• The dryer adjustment and the machinery speed must be regulated manual and adjusted to the relevant print object to guarantee a sufficient drying.
• Drying: hot air, IR reduced
• 建议检查粘度，必要时用最大 2 % 的水调整粘度。
• Please use printing inks suitable for coating.
• Resistance against alkali, alcohol and solvents should be given according to DIN ISO 2836, formerly DIN 16524, in order to exclude a change of colour.
• 如果水性涂料中需要使用防滑粉，必须选用适配性材料（不要使用矿物粉）。
• Recommended pile temperature: not › 35°C
• In order to guarantee a fast and complete drying, we recommend a sufficient airing of the sheets.
• There must be a sufficient hardening of the overall system substrate-printing ink-coating before further processing which shoud be checked in the process.
• 涂膜的全部特性在完全干燥后才会显现。
• For the further processing of the sheets under mechanical load and the influence of heat, a sufficient high basic consistency of the substrate is required.
• Important: - The coating should be tested definitely in practice. Furthermore, a pilot series should be produced and suitability must be tested by the end user. In case of further orders we are assumin

Product end use

• 其他非食品

Substrate recommendation

• PVC、PP、PE、PET 箔等