TERRAWET Gloss Coating G 9/640 HK FoodSafe-040

Water-based gloss coating with excellent drying and a very high wet block resistance. The coating has been FoodSafe certified. It is low migration (global migration limit < 60 mg/kg, EU cube model), compliant with the Swiss Ordinance (SR 817.023.21) and can be applied in the direct contact to dry and fat-including foodstuffs.

This product has been assessed against the criteria of the Material Health category in the Cradle to Cradle Certified™ Product Standard and was awarded a Gold level Material Health Certificate by the Cradle to Cradle Products Innovation Institute.

Product Details

Properties

Gloss

Scuff resistance

Hot foil stamping

Crackling tolerance

Foaming tolerance

Drying

Two-sided coating

Wet block resistance

UV varnishing

Counter glueing

Slip angle

16° - 22°

Foil lamination

Heat resistance

up to 150°C

Material Characteristics

Viscosity

40 sec. (20°C, DIN 4 mm cup)

60 sec. (20°C, DIN 4 mm cup)

Special Properties

Temporary barrier against fat and water

Applications (end uses)

Commercials (Brochures)

Folded boxes (Cap boxes (tobacco), Other non-food, Detergent packaging, Food indirect, Dry foodstuff packagings, Food direct, Frozen food packaging, Tobacco, Personal Care, Pharma)

Corrugated (Displays)

Processes

Wet-in-wet Sheet-fed offset, coating unit (chambered doctor blade or roller system) Gravure printing

Substrates

Aluminum foil laminated substrates Rearside PE coated board Metallized substrates Coated paper Coated board

Legislation Assessment

In principal the product can be used as directed and with a complete drying for the coating of foodstuff packagings for the indirect contact to the filling good. For information about the food legislation assessment of this product (e. g. demands on the Nestlé “Guidance Note on Packaging Inks” and the Swiss Ordinance (SR 817.023.21 - ordinance of the Swiss Confederation on materials & articles in contact with food)) we ask you to contact our department for quality, environment and product safety. T: +49 (0) 5132 5009-140 mail to: QUM.ACTEGA.Terra @altana.com In principal the product can be used as directed and with a complete drying for the coating of foodstuff packagings for the direct contact to the filling good. For information about the food legislation assessment of this product please contact our department for quality, environment and product safety. T: +49 (0) 5132 5009-140 mail to: QUM.ACTEGA.Terra@altana.com

Disclaimer

Please refer to our disclaimer in the Technical Datasheet and to the Legal Note on our corporate website.www.actega.com

Suggestions

Top Products

Flexible Packaging

Coatings

A world of Brands

Solution Expertise

The world of ACTEGA

Coasts & Seas