ACTGreen Gloss Coating AQ140378-050

From €3.51/kg

This water-based gloss coating is partly based on a mix of recycled petroleum-based raw materials and bio-based materials (50-55%, calculated on dry film). The product shows a fast drying, a high wet block resistance and a broad range of applications. It is suitable for the two-sided coating and counter gluing.

Markets Paper-based packaging Publications & Commercials

TECHNOLOGY Water-based

Processes Wet-in-wet Sheet-fed offset, coating unit

Key Properties High scuff resistance Suitable for hot foil stamping High foaming tolerance High wet block resistance Suitable for counter glueing

+compare

Save page as pdf

SELECT YOUR PRODUCT

Size	Unit	In stock If you request more units that those immediately available, we will prepare the delivery for you respecting the standard terms. For more information see the FAQ. Contact us using the CONTACT FORM	Total kg	Price/kg	Net Price*
25.0 Kg	- +	0 units	0.0 Kg	€0.00/Kg	€0.00

Id Number 330120757

If you order today, you will receive the goods in 6 - 9 working-days

SCALE PRICE TABLE

25.0 Kg

Unit	Price / unit	Price / kg
1	€286.25	€11.45
2-4	€121.50	€4.86
5-9	€94.25	€3.77
10-19	€90.25	€3.61
20+	€87.75	€3.51

Subtotal:€0.00

* Prices are net. If you have privately agreed conditions, please refer to those to check whether transportation costs are included.

Product Details

Properties

Gloss

Scuff resistance

Hot foil stamping

Crackling tolerance

Foaming tolerance

Drying

Two-sided coating

Wet block resistance

UV varnishing

Counter glueing

Slip angle

18 - 22°

Foil lamination

Heat resistance

Up to 120°C

Material Characteristics

Viscosity

50 sec. (20°C, DIN 4 mm cup)

Applications (end uses)

Commerical (Brochures)

Folding Cartons (Other non-food, Food indirect, Personal Care, Pharma)

Publication (Dust jackets)

Processes

Sheet-fed offset, coating unit (chambered doctor blade or roller system) Wet-in-wet

Substrates

Coated board Coated paper Rearside PE coated board Cast-coated substrates

Legislation Assessment

In principal the product can be used as directed and with a complete drying for the coating of foodstuff packagings for the indirect contact to the filling good. For information about the food legislation assessment of this product (e. g. demands on the Nestlé “Guidance Note on Packaging Inks” and the Swiss Ordinance (SR 817.023.21 - ordinance of the Swiss Confederation on materials & articles in contact with food)) we ask you to contact our department for quality, environment and product safety. T: +49 (0) 5132 5009-140 mail to: QUM.ACTEGA.Terra @altana.com

Disclaimer

Please refer to our disclaimer in the Technical Datasheet and to the Legal Note on our corporate website.www.actega.com

Publications & Commercials

Suggestions

Top Products