Actega Troubleshooting​​​ HOW-TO | LEP Primer Indicator


Application of the LEP Primer Indicator Solution

The indicator solution will determine whether the LEP primer has been applied uniformly on the entire substrate surface to enable bonding between the LEP inks, coating and substrate.
 

How-to: Apply the LEP Primer Indicator Solution

PRODUCT PORTFOLIO

ACTDigi® LEP Primer Indicator AQ1409611

Learn more about the product

Discover

How-to use the LEP Primer Indicator
Step by Step

1. PREPARATIONS

Whenever you work with the LEP primer indicator solution, please make sure that you are wearing a safety glass and chemical resistant nitrile gloves. Besides that you need a dauber bottle filled with the indicator. Last but not least a coated substrate is needed on which you can apply the indicator.

2. APPLICATION

Swipe the applicator across the surface of the substrate in a diagonal direction. You can also apply more primer indicator as needed.

3. ASSESSMENT

Inspect all areas where the LEP primer indicator has been applied for any change in color from blue to yellow. Yellow indicates voided areas where the primer was not applied to the substrate properly. Make sure that the indicator shows a uniform blue surface on the entire substrate because only then you will achieve a good printing result.

Still have open questions? Contact us and we will support you with the application.

CONTACT US


​​​​​​​Discover the How-to Series

Learn How to avoid trouble in the first place and make the most of ACTEGA products. The How-to Series is your source of content with smart tips that helps you to make the most of all ACTEGA products in your processes. In addition to state-of-the-art chemical specialties for the packaging industries, we are your knowledge partner offering technical expertise and useful information.

​​​​​​​Discover more

act.text.compare.close