HOW-TO | LEP Primer Indicator
Application of the LEP Primer Indicator Solution
The indicator solution will determine whether the LEP primer has been applied uniformly on the entire substrate surface to enable bonding between the LEP inks, coating and substrate.
ACTDigi® LEP Primer Indicator AQ1409611
Learn more about the product
How-to use the LEP Primer Indicator
Step by Step
Whenever you work with the LEP primer indicator solution, please make sure that you are wearing a safety glass and chemical resistant nitrile gloves. Besides that you need a dauber bottle filled with the indicator. Last but not least a coated substrate is needed on which you can apply the indicator.
Swipe the applicator across the surface of the substrate in a diagonal direction. You can also apply more primer indicator as needed.
Inspect all areas where the LEP primer indicator has been applied for any change in color from blue to yellow. Yellow indicates voided areas where the primer was not applied to the substrate properly. Make sure that the indicator shows a uniform blue surface on the entire substrate because only then you will achieve a good printing result.
Still have open questions? Contact us and we will support you with the application.CONTACT US
Discover the How-to Series
Learn How to avoid trouble in the first place and make the most of ACTEGA products. The How-to Series is your source of content with smart tips that helps you to make the most of all ACTEGA products in your processes. In addition to state-of-the-art chemical specialties for the packaging industries, we are your knowledge partner offering technical expertise and useful information.