TERRAWET® Gloss Coating G 9/425 FoodSafe-040
for the direct contact with dry/fat-including food, hot foil stampable
- Coatings
- Water based
Product Details
Markets
- Paperbased Packaging
- Publication & Commercial
Application method recommendation
- Gravure Printing
- Wet-on-dry
- Sheet-fed offset, coating unit
- Sheet-fed offset, coating unit (chambered doctor blade or roller system)
- Wet-in-wet
- Resistance against alkali, alcohol and solvents should be given according to DIN ISO 2836, formerly DIN 16524, in order to exclude a change of colour.
- For the further processing of the sheets under mechanical load and/or the influence of humidity, a sufficient high basic consistency of the substrate is required.
- Not suitable for the two-sided coating.
- There must be a suitability for water-based coating if anti-set-off powder is used (do not use mineral powder).
- Using non-absorbent substrates and / or slowly absorbent printing inks, we recommend to plan for the corresponding drying times.
- In order to guarantee a fast and complete drying, we recommend a sufficient airing of the sheets.
- Viscosity for processing in gravure printing: 15 - 20 sec. (dilution with water : ethanol - 3 : 1)
- Please use printing inks/foil inks suitable for coating.
- Stir well before use! Mechanical stirring is recommended.
- We recommend to omit adhesive straps.
- The full profile of characteristics of the coating film is available after complete drying.
- Recommended pile temperature: not › 35°C
- The coating is principally glueable (please test).
- Recommended coating application: 3,5 - 5 g/m²/wet
- The coating is suitable for wrapping in foils XS and MS (no acrylic coated foil).
Product end use
- Displays
- Food direct
- Other non-food
- Food indirect
- Personal Care
- Pharma
- Sweets
- Dry foodstuff packagings
- Brochures
Substrate recommendation
- Coated Board
- Coated Paper
Disclaimer
Product specifications are contained in the technical data sheet. Depending on the product, you can download this from the ACTEGA website or request it using the contact form. For more details, please refer to our product disclaimer here .