TERRAWET® Matt Coating G 9/115 silk matt FoodSafe-040

for the direct contact with dry/fat-including food, fast drying, semi-matt

  • Coatings
  • Water based
Contact

Product Details

Markets

  • Paperbased Packaging

Application method recommendation

  • Wet-in-wet
  • Sheet-fed offset, coating unit (chambered doctor blade or roller system)
  • Sheet-fed offset, coating unit
  • We recommend to omit adhesive straps.
  • In order to guarantee a fast and complete drying, we recommend a sufficient airing of the sheets.
  • Please use printing inks/foil inks suitable for coating.
  • Recommended coating application: 3,5 - 5 g/m²/wet
  • Stir well before use! Mechanical stirring is recommended.
  • There must be a sufficient hardening of the overall system substrate-printing ink-coating before further processing which shoud be checked in the process.
  • The full profile of characteristics of the coating film is available after complete drying.
  • There must be a suitability for water-based coating if anti-set-off powder is used (do not use mineral powder).
  • Resistance against alkali, alcohol and solvents should be given according to DIN ISO 2836, formerly DIN 16524, in order to exclude a change of colour.
  • Recommended pile temperature: not › 35°C
  • Using non-absorbent substrates and / or slowly absorbent printing inks, we recommend to plan for the corresponding drying times.
  • For the further processing of the sheets under mechanical load and/or the influence of humidity, a sufficient high basic consistency of the substrate is required.
  • The coating is suitable for wrapping in foils XS and MS (no acrylic coated foil).

Product end use

  • Food direct
  • Food indirect
  • Other non-food
  • Sweets
  • Dry foodstuff packagings

Substrate recommendation

  • Coated Paper
  • Rearside PE coated board
  • Coated Board

Disclaimer

Product specifications are contained in the technical data sheet. Depending on the product, you can download this from the ACTEGA website or request it using the contact form. For more details, please refer to our product disclaimer here .