TERRAWET® Matt Coating G 9/42 dull matt-040
dull matt, fast drying, very high wet block resistance
- Coatings
- Water based
Product Details
Markets
- Paperbased Packaging
- Publication & Commercial
- Labels
- Flexible Packaging
Application method recommendation
- Sheet-fed offset, coating unit (chambered doctor blade or roller system)
- Wet-in-wet
- Sheet-fed offset, coating unit
- Gravure Printing
- Flexo, reel-to-reel
- Recommended coating application: 3,5 - 5 g/m²/wet
- For the further processing of the sheets under mechanical load and/or the influence of humidity, a sufficient high basic consistency of the substrate is required.
- The full profile of characteristics of the coating film is available after complete drying.
- Using non-absorbent substrates and / or slowly absorbent printing inks, we recommend to plan for the corresponding drying times.
- The coating is suitable for wrapping in foils XS and MS (no acrylic coated foil).
- Stir well before use! Mechanical stirring is recommended.
- We recommend to omit adhesive straps.
- In order to guarantee a fast and complete drying, we recommend a sufficient airing of the sheets.
- Resistance against alkali, alcohol and solvents should be given according to DIN ISO 2836, formerly DIN 16524, in order to exclude a change of colour.
- Please use printing inks/foil inks suitable for coating.
- There must be a sufficient hardening of the overall system substrate-printing ink-coating before further processing which shoud be checked in the process.
- Recommended pile temperature: not › 35°C
- There must be a suitability for water-based coating if anti-set-off powder is used (do not use mineral powder).
Product end use
- Displays
- Food indirect
- Sweets
- CSD
- Other non-food
- Dry foodstuff packagings
- Brochures
- Beverages
- Coffee capsules, interior
- Industrial
Substrate recommendation
- Coated Board
- Coated Paper
- Rearside PE coated board
- PVC, PP, PE, PET foils etc.
- Aluminum foil laminated substrates
- Metallized substrates
Disclaimer
Product specifications are contained in the technical data sheet. Depending on the product, you can download this from the ACTEGA website or request it using the contact form. For more details, please refer to our product disclaimer here .