TERRAWET® Blister Coating G 9/923 ToySafe-045

suitable for sealing against PET A/G, PVC and board

  • Coatings
  • Water based

Product Details


  • Paperbased Packaging

Application method recommendation

  • Wet-in-wet
  • Coating unit
  • Wet-on-dry
  • Sheet-fed offset, coating unit (chambered doctor blade or roller system)
  • Sheet-fed offset, coating unit
  • Please use printing inks/foil inks suitable for coating.
  • In order to guarantee a fast and complete drying, we recommend a sufficient airing of the sheets.
  • Recommended coating application: 5 - 10 g/m²/wet Recommendation: double coating
  • There must be a suitability for water-based coating if anti-set-off powder is used (do not use mineral powder).
  • Using non-absorbent substrates and / or slowly absorbent printing inks, we recommend to plan for the corresponding drying times.
  • Stir well before use! Mechanical stirring is recommended.
  • Before processing, please check the blister ability.
  • The full profile of characteristics of the coating film is available after complete drying.
  • There must be a sufficient hardening of the overall system substrate-printing ink-coating before further processing which shoud be checked in the process.
  • Resistance against alkali, alcohol and solvents should be given according to DIN ISO 2836, formerly DIN 16524, in order to exclude a change of colour.
  • Standard sealing conditions: - Temperature: 180°C - 230°C, depending on used material - Time: 2 - 4 sec., depending on used material - Pressure: 5 bar - In case of suitable board and foil qualities seali
  • Recommended temperature: 18°C - 25°C. - Relative humidity: 50 % - 55 %
  • For the further processing of the sheets under mechanical load and/or the influence of humidity, a sufficient high basic consistency of the substrate is required.
  • Recommended pile temperature: not › 30°C
  • Blister cards should be stored cool and on edge.

Product end use

  • Toys
  • Blister


  • -

Substrate recommendation

  • Coated Board
  • Coated Paper


Product specifications are contained in the technical data sheet. Depending on the product, you can download this from the ACTEGA website or request it using the contact form. For more details, please refer to our product disclaimer here .