TERRAWET® Gloss Coating G 9/370 FoodSafe-060

for the direct contact with dry/fat-including food, Material Health Certificate (Gold)

  • Coatings
  • Water based

Product Details


  • Paperbased Packaging

Application method recommendation

  • Sheet-fed offset, coating unit
  • Sheet-fed offset, coating unit (chambered doctor blade or roller system)
  • Wet-in-wet
  • Using non-absorbent substrates and / or slowly absorbent printing inks, we recommend to plan for the corresponding drying times.
  • Recommended pile temperature: not › 35°C
  • Stir well before use! Mechanical stirring is recommended.
  • The coating is suitable for wrapping in foils XS and MS (no acrylic coated foil).
  • The coating is principally glueable (please test).
  • We recommend to omit adhesive straps.
  • Resistance against alkali, alcohol and solvents should be given according to DIN ISO 2836, formerly DIN 16524, in order to exclude a change of colour.
  • Recommended coating application: 3,5 - 5 g/m²/wet
  • There must be a suitability for water-based coating if anti-set-off powder is used (do not use mineral powder).
  • For the further processing of the sheets under mechanical load and/or the influence of humidity, a sufficient high basic consistency of the substrate is required.
  • The full profile of characteristics of the coating film is available after complete drying.
  • Please use printing inks/foil inks suitable for coating.

Product end use

  • Sweets
  • Food direct
  • Other non-food
  • Food indirect
  • Dry foodstuff packagings
  • CSD


  • -

Substrate recommendation

  • Coated Board
  • Coated Paper


Product specifications are contained in the technical data sheet. Depending on the product, you can download this from the ACTEGA website or request it using the contact form. For more details, please refer to our product disclaimer here .