TERRAWET® Gloss Coating G 9/640 FoodSafe-060

for the direct contact with dry/fat-including food, Material Health Certificate (Gold)

  • Coatings
  • Water based

Product Details


  • Paperbased Packaging
  • Labels
  • Publication & Commercial

Application method recommendation

  • Wet-in-wet
  • Gravure Printing
  • Sheet-fed offset, coating unit
  • Sheet-fed offset, coating unit (chambered doctor blade or roller system)
  • Recommended coating application: 3,5 - 5 g/m²/wet
  • Recommended pile temperature: not › 35°C
  • There must be a sufficient hardening of the overall system substrate-printing ink-coating before further processing which shoud be checked in the process.
  • For the further processing of the sheets under mechanical load and/or the influence of humidity, a sufficient high basic consistency of the substrate is required.
  • We recommend to omit adhesive straps.
  • The coating is suitable for wrapping in foils XS and MS (no acrylic coated foil).
  • There must be a suitability for water-based coating if anti-set-off powder is used (do not use mineral powder).
  • Resistance against alkali, alcohol and solvents should be given according to DIN ISO 2836, formerly DIN 16524, in order to exclude a change of colour.
  • Viscosity for processing in gravure printing: 15 - 20 sec. (dilution with water : ethanol - 3 : 1)
  • Please use printing inks/foil inks suitable for coating.
  • The full profile of characteristics of the coating film is available after complete drying.
  • In order to guarantee a fast and complete drying, we recommend a sufficient airing of the sheets.
  • Using non-absorbent substrates and / or slowly absorbent printing inks, we recommend to plan for the corresponding drying times.
  • Stir well before use! Mechanical stirring is recommended.

Product end use

  • Sweets
  • Food direct
  • Other non-food
  • Food indirect
  • Beverages
  • Personal Care
  • Pharma
  • Frozen food packaging
  • Dry foodstuff packagings
  • Detergent packaging
  • CSD
  • Brochures


  • -

Substrate recommendation

  • Rearside PE coated board
  • Aluminum foil laminated substrates
  • Coated Paper
  • Metallized substrates
  • Coated Board


Product specifications are contained in the technical data sheet. Depending on the product, you can download this from the ACTEGA website or request it using the contact form. For more details, please refer to our product disclaimer here .