TERRAWET® Gloss Coating G 9/703-040

Water-based Gloss Coating with Fast Drying and Good Wet Block and Scuff Resistance

  • Coatings
  • Water based
Contact

Product Details

Markets

  • Paperbased Packaging
  • Publication & Commercial
  • Labels
  • Flexible Packaging

Application method recommendation

  • Sheet-fed offset, coating unit
  • Sheet-fed offset, coating unit (chambered doctor blade or roller system)
  • Wet-in-wet
  • We recommend to omit adhesive straps.
  • Recommended coating application: 3,5 - 5 g/m²/wet
  • Recommended pile temperature: not › 35°C
  • Resistance against alkali, alcohol and solvents should be given according to DIN ISO 2836, formerly DIN 16524, in order to exclude a change of colour.
  • The coating is principally glueable (please test).
  • The full profile of characteristics of the coating film is available after complete drying.
  • Using non-absorbent substrates and / or slowly absorbent printing inks, we recommend to plan for the corresponding drying times.
  • The coating is suitable for wrapping in foils XS and MS (no acrylic coated foil).
  • Please use printing inks/foil inks suitable for coating.
  • For the further processing of the sheets under mechanical load and/or the influence of humidity, a sufficient high basic consistency of the substrate is required.
  • There must be a suitability for water-based coating if anti-set-off powder is used (do not use mineral powder).
  • Stir well before use! Mechanical stirring is recommended.

Product end use

  • Displays
  • Other non-food
  • Food indirect
  • Dry foodstuff packagings
  • Brochures
  • Beverages

Color

  • -

Substrate recommendation

  • Coated Board
  • Coated Paper

Disclaimer

Product specifications are contained in the technical data sheet. Depending on the product, you can download this from the ACTEGA website or request it using the contact form. For more details, please refer to our product disclaimer here .