TERRAWET® Gloss Coating G 9/703-060
Water-based Gloss Coating with Fast Drying and Good Wet Block and Scuff Resistance
- Coatings
- Water based
Product Details
Markets
- Paperbased Packaging
- Publication & Commercial
- Labels
Application method recommendation
- Sheet-fed offset, coating unit
- Wet-in-wet
- Sheet-fed offset, coating unit (chambered doctor blade or roller system)
- The coating is suitable for wrapping in foils XS and MS (no acrylic coated foil).
- Stir well before use! Mechanical stirring is recommended.
- We recommend to omit adhesive straps.
- For the further processing of the sheets under mechanical load and/or the influence of humidity, a sufficient high basic consistency of the substrate is required.
- The full profile of characteristics of the coating film is available after complete drying.
- Recommended coating application: 3,5 - 5 g/m²/wet
- Please use printing inks/foil inks suitable for coating.
- Recommended pile temperature: not › 35°C
- Resistance against alkali, alcohol and solvents should be given according to DIN ISO 2836, formerly DIN 16524, in order to exclude a change of colour.
- There must be a suitability for water-based coating if anti-set-off powder is used (do not use mineral powder).
- Using non-absorbent substrates and / or slowly absorbent printing inks, we recommend to plan for the corresponding drying times.
- The coating is principally glueable (please test).
Product end use
- Other non-food
- Food indirect
- Dry foodstuff packagings
- Brochures
- Beverages
Substrate recommendation
- Coated Paper
- Coated Board
Disclaimer
Product specifications are contained in the technical data sheet. Depending on the product, you can download this from the ACTEGA website or request it using the contact form. For more details, please refer to our product disclaimer here .