TERRAWET® Gloss Coating G 9/706 FoodSafe-040

Water-based Gloss Coating with Fast Drying and Good Wet Block Resistance. Material Health Certificate (Gold)

  • Coatings
  • Water based
Contact

Product Details

Markets

  • Paperbased Packaging
  • Labels

Application method recommendation

  • Sheet-fed offset, coating unit (chambered doctor blade or roller system)
  • Wet-in-wet
  • Stir well before use! Mechanical stirring is recommended.
  • Recommended coating application: 3,5 - 5 g/m²/wet
  • The coating is suitable for wrapping in foils XS and MS (no acrylic coated foil).
  • The coating is principally glueable (please test).
  • The full profile of characteristics of the coating film is available after complete drying.
  • For the further processing of the sheets under mechanical load and/or the influence of humidity, a sufficient high basic consistency of the substrate is required.
  • Please use printing inks/foil inks suitable for coating.
  • There must be a suitability for water-based coating if anti-set-off powder is used (do not use mineral powder).
  • Resistance against alkali, alcohol and solvents should be given according to DIN ISO 2836, formerly DIN 16524, in order to exclude a change of colour.
  • We recommend to omit adhesive straps.
  • Using non-absorbent substrates and / or slowly absorbent printing inks, we recommend to plan for the corresponding drying times.
  • Recommended pile temperature: not › 35°C

Product end use

  • Displays
  • Food direct
  • Food indirect
  • Other non-food
  • Beverages
  • Dry foodstuff packagings

Substrate recommendation

  • Coated Paper
  • Coated Board

Disclaimer

Product specifications are contained in the technical data sheet. Depending on the product, you can download this from the ACTEGA website or request it using the contact form. For more details, please refer to our product disclaimer here .