TERRAWET® Matt Coating G 9/131 silk matt-040
semi-matt, fast drying, very high wet block resistance
- Coatings
- Water based
Product Details
Markets
- Paperbased Packaging
- Publication & Commercial
- Labels
Application method recommendation
- Wet-in-wet
- Sheet-fed offset, coating unit (chambered doctor blade or roller system)
- Stir well before use! Mechanical stirring is recommended.
- Recommended coating application: 3,5 - 5 g/m²/wet
- Please use printing inks/foil inks suitable for coating.
- Resistance against alkali, alcohol and solvents should be given according to DIN ISO 2836, formerly DIN 16524, in order to exclude a change of colour.
- We recommend to omit adhesive straps.
- Using non-absorbent substrates and / or slowly absorbent printing inks, we recommend to plan for the corresponding drying times.
- There must be a suitability for water-based coating if anti-set-off powder is used (do not use mineral powder).
- Recommended pile temperature: not › 35°C
- There must be a sufficient hardening of the overall system substrate-printing ink-coating before further processing which shoud be checked in the process.
- The full profile of characteristics of the coating film is available after complete drying.
- For the further processing of the sheets under mechanical load and/or the influence of humidity, a sufficient high basic consistency of the substrate is required.
- The coating is suitable for wrapping in foils XS and MS (no acrylic coated foil).
- In order to guarantee a fast and complete drying, we recommend a sufficient airing of the sheets.
Product end use
- Displays
- Other non-food
- Food indirect
- Dry foodstuff packagings
- Brochures
- Beverages
Substrate recommendation
- Rearside PE coated board
- Coated Paper
- Coated Board
Disclaimer
Product specifications are contained in the technical data sheet. Depending on the product, you can download this from the ACTEGA website or request it using the contact form. For more details, please refer to our product disclaimer here .