TERRAWET® Matt Coating G 9/56 M FoodSafe-050

Water-based Matte Coating, FoodSafe Certified

  • Coatings
  • Water based

Product Details


  • Labels
  • Paperbased Packaging
  • Publication & Commercial

Application method recommendation

  • Sheet-fed offset, coating unit
  • Wet-on-dry
  • Wet-in-wet
  • Coating unit
  • Sheet-fed offset, coating unit (chambered doctor blade or roller system)
  • Flexo unit
  • In order to guarantee a fast and complete drying, we recommend a sufficient airing of the sheets.
  • Using non-absorbent substrates and / or slowly absorbent printing inks, we recommend to plan for the corresponding drying times.
  • The full profile of characteristics of the coating film is available after complete drying.
  • Resistance against alkali, alcohol and solvents should be given according to DIN ISO 2836, formerly DIN 16524, in order to exclude a change of colour.
  • There must be a sufficient hardening of the overall system substrate-printing ink-coating before further processing which shoud be checked in the process.
  • Please use printing inks/foil inks suitable for coating.
  • There must be a suitability for water-based coating if anti-set-off powder is used (do not use mineral powder).
  • We recommend to omit adhesive straps.
  • Recommended coating application: 3,5 - 5 g/m²/wet
  • The coating is suitable for wrapping in foils XS and MS (no acrylic coated foil).
  • For the further processing of the sheets under mechanical load and/or the influence of humidity, a sufficient high basic consistency of the substrate is required.
  • Stir well before use! Mechanical stirring is recommended.
  • Recommended pile temperature: not › 35°C

Product end use

  • Food indirect
  • Other non-food
  • Beverages
  • Displays
  • Sweets
  • Food direct
  • Personal Care
  • Pharma
  • Microwave packaging
  • Dry foodstuff packagings
  • CSD


  • -

Substrate recommendation

  • Coated Board
  • Metallized substrates
  • PVC, PP, PE, PET foils etc.
  • Coated Paper
  • Cast-coated substrates
  • Aluminum foil laminated substrates
  • Rearside PE coated board


Product specifications are contained in the technical data sheet. Depending on the product, you can download this from the ACTEGA website or request it using the contact form. For more details, please refer to our product disclaimer here .