TERRAWET® Matt Coating G 9/65 dull matt FoodSafe-060

fast drying, very high wet block resistance, for the two-sided coating, FoodSafe certified

  • Coatings
  • Water based

Product Details


  • Paperbased Packaging

Application method recommendation

  • Recommended coating application: 2 - 4 g/m²/wet
  • Stir well before use! Mechanical stirring is recommended.
  • We recommend to check the viscosity and to adjust it with max. 2 % water if necessary.
  • Please use printing inks suitable for coating.
  • Resistance against alkali, alcohol and solvents should be given according to DIN ISO 2836, formerly DIN 16524, in order to exclude a change of colour.
  • There must be a suitability for water-based coating if anti-set-off powder is used (do not use mineral powder).
  • Using non-absorbent substrates and / or slowly absorbent printing inks, we recommend to plan for the corresponding drying times.
  • We recommend to omit adhesive straps.
  • Recommended pile temperature: not › 35°C
  • In order to guarantee a fast and complete drying, we recommend a sufficient airing of the sheets.
  • The full profile of characteristics of the coating film is available after complete drying.
  • There must be a sufficient hardening of the overall system substrate-printing ink-coating before further processing which shoud be checked in the process.
  • For the further processing of the sheets under mechanical load and/or the influence of humidity, a sufficient high basic consistency of the substrate is required.
  • The coating is suitable for wrapping in foils XS and MS (no acrylic coated foil).
  • Sheet-fed offset, coating unit (chambered doctor blade or roller system)
  • Wet-in-wet

Product end use

  • Food direct
  • Food indirect
  • Dry foodstuff packagings
  • Sweets
  • Other non-food


  • -

Substrate recommendation

  • Coated Paper
  • Coated Board
  • Rearside PE coated board


Product specifications are contained in the technical data sheet. Depending on the product, you can download this from the ACTEGA website or request it using the contact form. For more details, please refer to our product disclaimer here .