TERRAWET® Matt Coating G 9/81 matt-040

matt, fast drying, very high wet block resistance, especially low odor

  • Coatings
  • Water based
Contact

Product Details

Markets

  • Paperbased Packaging
  • Publication & Commercial
  • Labels

Application method recommendation

  • Sheet-fed offset, coating unit (chambered doctor blade or roller system)
  • Sheet-fed offset, coating unit
  • Wet-in-wet
  • Using non-absorbent substrates and / or slowly absorbent printing inks, we recommend to plan for the corresponding drying times.
  • The full profile of characteristics of the coating film is available after complete drying.
  • There must be a suitability for water-based coating if anti-set-off powder is used (do not use mineral powder).
  • The coating is suitable for wrapping in foils XS and MS (no acrylic coated foil).
  • Resistance against alkali, alcohol and solvents should be given according to DIN ISO 2836, formerly DIN 16524, in order to exclude a change of colour.
  • We recommend to omit adhesive straps.
  • In order to guarantee a fast and complete drying, we recommend a sufficient airing of the sheets.
  • Recommended coating application: 3,5 - 5 g/m²/wet
  • Stir well before use! Mechanical stirring is recommended.
  • Recommended pile temperature: not › 35°C
  • There must be a sufficient hardening of the overall system substrate-printing ink-coating before further processing which shoud be checked in the process.
  • Please use printing inks/foil inks suitable for coating.
  • For the further processing of the sheets under mechanical load and/or the influence of humidity, a sufficient high basic consistency of the substrate is required.

Product end use

  • Displays
  • Other non-food
  • Food indirect
  • Dry foodstuff packagings
  • Brochures
  • Beverages

Substrate recommendation

  • Coated Paper
  • Rearside PE coated board
  • Coated Board

Disclaimer

Product specifications are contained in the technical data sheet. Depending on the product, you can download this from the ACTEGA website or request it using the contact form. For more details, please refer to our product disclaimer here .