TERRAWET® Playing Card Coating G 9/924 ToySafe-045
Water based playing card coating with an excellent playability.
- Coatings
- Water based
Product Details
Markets
- Publication & Commercial
Application method recommendation
- Recommended pile temperature: not › 35°C
- Using non-absorbent substrates and / or slowly absorbent printing inks, we recommend to plan for the corresponding drying times.
- The coating is principally glueable (please test).
- Resistance against alkali, alcohol and solvents should be given according to DIN ISO 2836, formerly DIN 16524, in order to exclude a change of colour.
- In order to guarantee a fast and complete drying, we recommend a sufficient airing of the sheets.
- The coating is suitable for wrapping in foils XS and MS (no acrylic coated foil).
- A low odour (GA) version is available.
- Recommended coating application: 3,5 - 5 g/m²/wet
- Please use printing inks/foil inks suitable for coating.
- There must be a suitability for water-based coating if anti-set-off powder is used (do not use mineral powder).
- For the further processing of the sheets under mechanical load and/or the influence of humidity, a sufficient high basic consistency of the substrate is required.
- The full profile of characteristics of the coating film is available after complete drying.
- We recommend to omit adhesive straps.
- Stir well before use! Mechanical stirring is recommended.
- Sheet-fed offset, coating unit (chambered doctor blade or roller system)
- Wet-in-wet
Product end use
- Playing Cards
Substrate recommendation
- Coated Board
- Playing card board
Disclaimer
Product specifications are contained in the technical data sheet. Depending on the product, you can download this from the ACTEGA website or request it using the contact form. For more details, please refer to our product disclaimer here .