TERRAWET® Special Coating G 9/221 FoodSafe-040
for non absorbent surfaces, Material Health Certificate (Gold)
- Coatings
- Water based
Product Details
Markets
- Paperbased Packaging
- Labels
- Flexible Packaging
Application method recommendation
- Wet-in-wet
- Flexo, pre-print
- Wet-on-dry
- Sheet-fed offset, coating unit (chambered doctor blade or roller system)
- Flexo, reel-to-reel
- Please use printing inks/foil inks suitable for coating.
- There must be a suitability for water-based coating if anti-set-off powder is used (do not use mineral powder).
- Using non-absorbent substrates and / or slowly absorbent printing inks, we recommend to plan for the corresponding drying times.
- In order to guarantee a fast and complete drying, we recommend a sufficient airing of the sheets.
- There must be a sufficient hardening of the overall system substrate-printing ink-coating before further processing which shoud be checked in the process.
- The coating is suitable for wrapping in foils XS and MS (no acrylic coated foil).
- Recommended pile temperature: not › 35°C
- The full profile of characteristics of the coating film is available after complete drying.
- We recommend to omit adhesive straps.
- Recommended coating application: 3,5 - 5 g/m²/wet
- Resistance against alkali, alcohol and solvents should be given according to DIN ISO 2836, formerly DIN 16524, in order to exclude a change of colour.
- For the further processing of the sheets under mechanical load and/or the influence of humidity, a sufficient high basic consistency of the substrate is required.
- Stir well before use! Mechanical stirring is recommended.
Product end use
- Displays
- Food direct
- Food indirect
- Other non-food
- Frozen food packaging
- Dry foodstuff packagings
- Detergent packaging
- Beverages
- Sac packaging
- Soup bags
Substrate recommendation
- Aluminum foil laminated substrates
- Two-sided PE-coated board
- Coated Paper
- Coated Board
- Rearside PE coated board
- Metallized substrates
- PVC, PP, PE, PET foils etc.
Disclaimer
Product specifications are contained in the technical data sheet. Depending on the product, you can download this from the ACTEGA website or request it using the contact form. For more details, please refer to our product disclaimer here .