TERRAWET® Special Coating G 9/595 W-040

Water-based Special Coating with High Crackling Tolerance

  • Coatings
  • Water based

Product Details


  • Paperbased Packaging
  • Labels

Application method recommendation

  • Sheet-fed offset, coating unit
  • Sheet-fed offset, coating unit (chambered doctor blade or roller system)
  • Gravure Printing
  • Wet-on-dry
  • Wet-in-wet
  • Viscosity for processing in gravure printing: 15 - 20 sec. (dilution with water : ethanol - 3 : 1)
  • Resistance against alkali, alcohol and solvents should be given according to DIN ISO 2836, formerly DIN 16524, in order to exclude a change of colour.
  • There must be a suitability for water-based coating if anti-set-off powder is used (do not use mineral powder).
  • The coating is suitable for wrapping in foils XS and MS (no acrylic coated foil).
  • Please use printing inks/foil inks suitable for coating.
  • There must be a sufficient hardening of the overall system substrate-printing ink-coating before further processing which shoud be checked in the process.
  • For the further processing of the sheets under mechanical load and/or the influence of humidity, a sufficient high basic consistency of the substrate is required.
  • Using non-absorbent substrates and / or slowly absorbent printing inks, we recommend to plan for the corresponding drying times.
  • In order to guarantee a fast and complete drying, we recommend a sufficient airing of the sheets.
  • We recommend to omit adhesive straps.
  • Recommended pile temperature: not › 35°C
  • Stir well before use! Mechanical stirring is recommended.
  • Recommended coating application: 3,5 - 5 g/m²/wet
  • The full profile of characteristics of the coating film is available after complete drying.

Product end use

  • Sweets
  • Other non-food
  • Food indirect
  • Personal Care
  • Pharma
  • Frozen food packaging
  • Dry foodstuff packagings
  • CSD
  • Beverages


  • -

Substrate recommendation

  • Coated Board
  • Rearside PE coated board
  • Metallized substrates
  • Cast-coated substrates
  • Aluminum foil laminated substrates
  • Coated Paper


Product specifications are contained in the technical data sheet. Depending on the product, you can download this from the ACTEGA website or request it using the contact form. For more details, please refer to our product disclaimer here .