TERRAWET® Special Coating G 9/595 W-060

Water-based Special Coating with High Crackling Tolerance

  • Coatings
  • Water based

Product Details


  • Paperbased Packaging
  • Labels

Application method recommendation

  • Wet-in-wet
  • Sheet-fed offset, coating unit (chambered doctor blade or roller system)
  • Gravure Printing
  • Sheet-fed offset, coating unit
  • Wet-on-dry
  • Stir well before use! Mechanical stirring is recommended.
  • In order to guarantee a fast and complete drying, we recommend a sufficient airing of the sheets.
  • Recommended pile temperature: not › 35°C
  • The full profile of characteristics of the coating film is available after complete drying.
  • For the further processing of the sheets under mechanical load and/or the influence of humidity, a sufficient high basic consistency of the substrate is required.
  • Resistance against alkali, alcohol and solvents should be given according to DIN ISO 2836, formerly DIN 16524, in order to exclude a change of colour.
  • Viscosity for processing in gravure printing: 15 - 20 sec. (dilution with water : ethanol - 3 : 1)
  • The coating is suitable for wrapping in foils XS and MS (no acrylic coated foil).
  • Please use printing inks/foil inks suitable for coating.
  • There must be a sufficient hardening of the overall system substrate-printing ink-coating before further processing which shoud be checked in the process.
  • We recommend to omit adhesive straps.
  • Recommended coating application: 3,5 - 5 g/m²/wet
  • Using non-absorbent substrates and / or slowly absorbent printing inks, we recommend to plan for the corresponding drying times.
  • There must be a suitability for water-based coating if anti-set-off powder is used (do not use mineral powder).

Product end use

  • Sweets
  • Other non-food
  • Food indirect
  • Personal Care
  • Pharma
  • Frozen food packaging
  • Dry foodstuff packagings
  • CSD
  • Beverages


  • -

Substrate recommendation

  • Aluminum foil laminated substrates
  • Coated Board
  • Rearside PE coated board
  • Metallized substrates
  • Coated Paper
  • Cast-coated substrates


Product specifications are contained in the technical data sheet. Depending on the product, you can download this from the ACTEGA website or request it using the contact form. For more details, please refer to our product disclaimer here .