TERRAWET® Special Coating G 9/688-060

Water-based Coating with Exellent Alkaline Penetration

  • Coatings
  • Water based

Product Details


  • Labels

Application method recommendation

  • Sheet-fed offset, coating unit
  • Sheet-fed offset, coating unit (chambered doctor blade or roller system)
  • Wet-in-wet
  • Coating unit
  • The coating is suitable for wrapping in foils XS and MS (no acrylic coated foil).
  • Resistance against alkali, alcohol and solvents should be given according to DIN ISO 2836, formerly DIN 16524, in order to exclude a change of colour.
  • We recommend to omit adhesive straps.
  • Recommended pile temperature: not › 35°C
  • There must be a suitability for water-based coating if anti-set-off powder is used (do not use mineral powder).
  • Stir well before use! Mechanical stirring is recommended.
  • For the further processing of the sheets under mechanical load and/or the influence of humidity, a sufficient high basic consistency of the substrate is required.
  • Recommended coating application: 3,5 - 5 g/m²/wet
  • Using non-absorbent substrates and / or slowly absorbent printing inks, we recommend to plan for the corresponding drying times.
  • Please use printing inks/foil inks suitable for coating.
  • There must be a sufficient hardening of the overall system substrate-printing ink-coating before further processing which shoud be checked in the process.
  • The full profile of characteristics of the coating film is available after complete drying.
  • In order to guarantee a fast and complete drying, we recommend a sufficient airing of the sheets.

Product end use

  • Other non-food
  • Beverages


  • -

Substrate recommendation

  • Cast-coated substrates
  • Metallized substrates
  • Coated Paper


Product specifications are contained in the technical data sheet. Depending on the product, you can download this from the ACTEGA website or request it using the contact form. For more details, please refer to our product disclaimer here .