TERRAWET Anti-Slip Coating G 9/260 SZ FoodSafe-040

Water based gloss coating with an antislippery surface.

  • Coatings
  • Water based

Product Details


  • Paperbased Packaging

Application method recommendation

  • There must be a suitability for water-based coating if anti-set-off powder is used (do not use mineral powder).
  • There must be a sufficient hardening of the overall system substrate-printing ink-coating before further processing which shoud be checked in the process.
  • Stir well before use! Mechanical stirring is recommended.
  • We recommend to omit adhesive straps.
  • Recommended coating application: 4 - 6 g/m²/wet
  • The coating is suitable for wrapping in foils XS and MS (no acrylic coated foil).
  • Please use printing inks/foil inks suitable for coating.
  • The full profile of characteristics of the coating film is available after complete drying.
  • Using non-absorbent substrates and / or slowly absorbent printing inks, we recommend to plan for the corresponding drying times.
  • For the further processing of the sheets under mechanical load and/or the influence of humidity, a sufficient high basic consistency of the substrate is required.
  • Resistance against alkali, alcohol and solvents should be given according to DIN ISO 2836, formerly DIN 16524, in order to exclude a change of colour.
  • In order to guarantee a fast and complete drying, we recommend a sufficient airing of the sheets.
  • Recommended pile temperature: not › 35°C
  • Wet-in-wet
  • Wet-on-dry
  • Sheet-fed offset, coating unit (chambered doctor blade or roller system)

Product end use

  • Displays
  • Food direct
  • Food indirect
  • Other non-food
  • Dry foodstuff packagings
  • Corrugated


  • -

Substrate recommendation

  • Coated Paper
  • Coated Board


Product specifications are contained in the technical data sheet. Depending on the product, you can download this from the ACTEGA website or request it using the contact form. For more details, please refer to our product disclaimer here .