TERRAWET Matt Coating G 9/56 M FoodSafe-035
for the direct contact with dry/fat-including food, Material Health Certificate (Gold)
- Coatings
- Water based
Product Details
Markets
- Labels
- Paperbased Packaging
- Publication & Commercial
Application method recommendation
- Flexo unit
- Sheet-fed offset, coating unit (chambered doctor blade or roller system)
- Sheet-fed offset, coating unit
- Coating unit
- Wet-on-dry
- Wet-in-wet
- We recommend to omit adhesive straps.
- The coating is suitable for wrapping in foils XS and MS (no acrylic coated foil).
- Please use printing inks/foil inks suitable for coating.
- Resistance against alkali, alcohol and solvents should be given according to DIN ISO 2836, formerly DIN 16524, in order to exclude a change of colour.
- Stir well before use! Mechanical stirring is recommended.
- Using non-absorbent substrates and / or slowly absorbent printing inks, we recommend to plan for the corresponding drying times.
- Recommended pile temperature: not › 35°C
- There must be a suitability for water-based coating if anti-set-off powder is used (do not use mineral powder).
- In order to guarantee a fast and complete drying, we recommend a sufficient airing of the sheets.
- For the further processing of the sheets under mechanical load and/or the influence of humidity, a sufficient high basic consistency of the substrate is required.
- There must be a sufficient hardening of the overall system substrate-printing ink-coating before further processing which shoud be checked in the process.
- Recommended coating application: 3,5 - 5 g/m²/wet
- The full profile of characteristics of the coating film is available after complete drying.
Product end use
- Food indirect
- Other non-food
- Beverages
- Displays
- Sweets
- Food direct
- Personal Care
- Pharma
- Microwave packaging
- CSD
- Brochures
Substrate recommendation
- PVC, PP, PE, PET foils etc.
- Coated Board
- Coated Paper
- Metallized substrates
- Cast-coated substrates
- Aluminum foil laminated substrates
- Rearside PE coated board
Disclaimer
Product specifications are contained in the technical data sheet. Depending on the product, you can download this from the ACTEGA website or request it using the contact form. For more details, please refer to our product disclaimer here .