TERRAWET Neutral Coating G 9/117-040

very fast drying, high wet block resistance

  • Coatings
  • Water based
Contact

Product Details

Markets

  • Paperbased Packaging
  • Publication & Commercial

Application method recommendation

  • Wet-in-wet
  • Sheet-fed offset, coating unit (chambered doctor blade or roller system)
  • Sheet-fed offset, coating unit
  • The coating is suitable for wrapping in foils XS and MS (no acrylic coated foil).
  • For the further processing of the sheets under mechanical load and/or the influence of humidity, a sufficient high basic consistency of the substrate is required.
  • We recommend to omit adhesive straps.
  • There must be a suitability for water-based coating if anti-set-off powder is used (do not use mineral powder).
  • The coating is principally glueable (please test).
  • Resistance against alkali, alcohol and solvents should be given according to DIN ISO 2836, formerly DIN 16524, in order to exclude a change of colour.
  • Please use printing inks/foil inks suitable for coating.
  • Stir well before use! Mechanical stirring is recommended.
  • Recommended pile temperature: not › 35°C
  • Using non-absorbent substrates and / or slowly absorbent printing inks, we recommend to plan for the corresponding drying times.
  • The full profile of characteristics of the coating film is available after complete drying.
  • In order to guarantee a fast and complete drying, we recommend a sufficient airing of the sheets.
  • Recommended coating application: 3,5 - 5 g/m²/wet

Product end use

  • Displays
  • Other non-food
  • Food indirect
  • Dry foodstuff packagings
  • Brochures

Substrate recommendation

  • Coated Board
  • Coated Paper

Disclaimer

Product specifications are contained in the technical data sheet. Depending on the product, you can download this from the ACTEGA website or request it using the contact form. For more details, please refer to our product disclaimer here .