TERRAWET Special Coating G 9/221 FoodSafe-055

for non absorbent surfaces, Material Health Certificate (Gold)

  • Coatings
  • Water based

Product Details


  • Paperbased Packaging
  • Labels

Application method recommendation

  • Wet-in-wet
  • Flexo, pre-print
  • Wet-on-dry
  • Sheet-fed offset, coating unit (chambered doctor blade or roller system)
  • Flexo, reel-to-reel
  • Stir well before use! Mechanical stirring is recommended.
  • There must be a suitability for water-based coating if anti-set-off powder is used (do not use mineral powder).
  • The coating is suitable for wrapping in foils XS and MS (no acrylic coated foil).
  • Recommended coating application: 3,5 - 5 g/m²/wet
  • For the further processing of the sheets under mechanical load and/or the influence of humidity, a sufficient high basic consistency of the substrate is required.
  • Recommended pile temperature: not › 35°C
  • The full profile of characteristics of the coating film is available after complete drying.
  • In order to guarantee a fast and complete drying, we recommend a sufficient airing of the sheets.
  • Please use printing inks/foil inks suitable for coating.
  • Resistance against alkali, alcohol and solvents should be given according to DIN ISO 2836, formerly DIN 16524, in order to exclude a change of colour.
  • We recommend to omit adhesive straps.
  • Using non-absorbent substrates and / or slowly absorbent printing inks, we recommend to plan for the corresponding drying times.
  • There must be a sufficient hardening of the overall system substrate-printing ink-coating before further processing which shoud be checked in the process.

Product end use

  • Displays
  • Food direct
  • Food indirect
  • Dry foodstuff packagings
  • Frozen food packaging
  • Other non-food
  • Detergent packaging
  • Beverages


  • -

Substrate recommendation

  • Coated Paper
  • Coated Board
  • Aluminum foil laminated substrates
  • Rearside PE coated board
  • Two-sided PE-coated board
  • Metallized substrates
  • PVC, PP, PE, PET foils etc.


Product specifications are contained in the technical data sheet. Depending on the product, you can download this from the ACTEGA website or request it using the contact form. For more details, please refer to our product disclaimer here .