WESSCO® LM 27.512.11 UV Coating High Gloss
Low migration UV high-gloss coating for overprinting WESSCO Polar metallic inks. Suitable for flexo units.
- Coatings
- UV curing
Product Details
Markets
- Labels
Application method recommendation
- Stir well before use! Mechanical stirring is recommended.
- The property profile of the coating film is given in case of a complete curing. The curing depends on the efficiency of lamps, life of UV lamps, machinery speed, general conditions of the UV unit (reflectors, etc.), temperature and the distance from the UV unit to the substrate. We recommend to clean regularly the reflectors and - if necessary - to change the lamps in case of a drop in lamp efficiency.
- A strong absorption on absorbent surfaces can cause an insufficient curing of the UV varnish, sensory problems, mechanical influence as well as rub resistance problems and poor slip properties.
- The printing inks should be suitable for coating. The resistance against alkali, alcohol and solvents should be given in accordance to DIN ISO 2836, former DIN 16524, to exclude any colour change.
- The total structure of substrate/printing ink/varnish must be cured/dried sufficiently before processing and should be checked during the process.
- Flexo unit
Product end use
- Pressure Sensitive Labels
Color
- transparent
Substrate recommendation
- Coated Paper
- Coated Board
- Plastics
Disclaimer
Product specifications are contained in the technical data sheet. Depending on the product, you can download this from the ACTEGA website or request it using the contact form. For more details, please refer to our product disclaimer here .
Documents
Technical Datasheet