TERRAWET® High Gloss Coating G 9/561-060

for a high gloss on different paper and board surfaces

  • Coatings
  • Water based

Product Details


  • Publication & Commercial
  • Paperbased Packaging
  • Labels

Application method recommendation

  • Wet-in-wet
  • Wet-on-dry
  • Sheet-fed offset, coating unit (chambered doctor blade or roller system)
  • Sheet-fed offset, coating unit
  • For the further processing of the sheets under mechanical load and/or the influence of humidity, a sufficient high basic consistency of the substrate is required.
  • Recommended pile temperature: not › 35°C
  • Stir well before use! Mechanical stirring is recommended.
  • Using non-absorbent substrates and / or slowly absorbent printing inks, we recommend to plan for the corresponding drying times.
  • Resistance against alkali, alcohol and solvents should be given according to DIN ISO 2836, formerly DIN 16524, in order to exclude a change of colour.
  • In order to guarantee a fast and complete drying, we recommend a sufficient airing of the sheets.
  • Recommended coating application: 3,5 - 5 g/m²/wet
  • The coating is suitable for wrapping in foils XS and MS (no acrylic coated foil).
  • There must be a suitability for water-based coating if anti-set-off powder is used (do not use mineral powder).
  • We recommend to omit adhesive straps.
  • The coating is principally glueable (please test).
  • Please use printing inks/foil inks suitable for coating.
  • The full profile of characteristics of the coating film is available after complete drying.

Product end use

  • Brochures
  • Other non-food
  • Food indirect
  • Personal Care
  • Pharma
  • Dry foodstuff packagings
  • Beverages


  • -

Substrate recommendation

  • Coated Board
  • Coated Paper


Product specifications are contained in the technical data sheet. Depending on the product, you can download this from the ACTEGA website or request it using the contact form. For more details, please refer to our product disclaimer here .